D  —  E  —  F

Cylindrical float
with spherical bottoms type 2

Product information

Diameter | D: from 9 mm to 1200 mm
Diameter edge | DR: depending on D an t
Height | H: please specify
Material thickness | t: from 0,2 mm to 4,0 mm

Material: any metal

Suspension: any suspension (examples see appendix)

Internal diameter pipe | DIR: please specify
Outer diameter pipe | DAR: please specify
Length of pipe | HR: please specify

Height of magnet center | HMM: please specify
North pole | N: please specify polarization
South pole | S: please specify polarization

Technical drawing

Cylindrical float
with straight bottoms type 3

Product information

Diameter | D: from 6 mm to 2500 mm
Diameter edge | DR: depending on D and t
Height | H: please specify
Material thickness | t: from 0,2 mm to 4,0 mm

Material: any metal

Suspension: any suspension (examples see appendix)

Internal diameter pipe | DIR: please specify
Outer diameter pipe | DAR: please specify
Length of pipe | HR: please specify

Height of magnet center | HMM: please specify
North pole | N: please specify polarization
South pole | S: please specify polarization

Technical drawing

Cylindrical float
with arched bottoms type 4

Product information

Diameter | D: from 9 mm to 3000 mm
Diameter edge | DR: depending on D and t
Height | H: please specify
Height of the vault | h1 & h2: specify if necessary
Material thickness | t: from 0,2 mm to 4,0 mm

Material: any metal

Suspension: any suspension (examples see appendix)

Internal diameter pipe | DIR: please specify
Outer diameter pipe | DAR: please specify
Length of pipe | HR: please specify

Height of magnet center | HMM: please specify
North pole | N: please specify polarization
South pole | S: please specify polarization

Technical drawing

Production:
We already produce from one piece to mass production.

We only process metals like:
Aluminium
Chrome-nickel steel (1.4016, 1.4301, 1.4306, 1.4307, 1.4401, 1.4404, 1.4435, 1.4439, 1.4462, 1.4539, 1.4541, 1.4571, 1.4828 etc.)
Copper
Brass
Nickel-based material (Alloy 625, Alloy 825, B2, B3, C2, C4, C22, C276, Monel 400 etc.)
Tantalum
Titanium (Gr.1, Gr.2, Gr.4)
Material thickness:
Deep-drawn parts and floats from 0,2 mm to 4,0 mm
Laser cutting parts from 0,2 mm to 25 mm

Attachment parts:
Each float can be produced with each attachment part (suspension, fill screw, guide pipe, magnet system etc.)

Test:
Pressure test possible to 400 bar if required.
X-ray inspection if required.
All floats are tested for 100 % tightness.